Industry applied training on Service and Commissioning – SINUMERIK 828D 

13.04.2023

Ms Tu guided the industry technicians how to connect pins of handwheel to the PLC to control the SINUMERIK 828D System.

Participants learned configuring the drives in CNC machines.

Mr Hung introduced configurations of the system’s hardware.

Training participants discussed and solved real work problems on CNC machine configuration in teamwork.

Participants practiced configuring CNC machines.

Teamwork to detect and remedy configuration machine failures.

Participants of the industry with master trainers and GIZ integrated expert after course completion.

LILAMA 2 International Technology College (LILAMA 2) has timely responded to the demand of the industry and offers the brand-new further training course for the CNC manufacturing industry on Basic Service and Commissioning – SINUMERIK 828D.

Two training courses of 40h were conducted at LILAMA 2 in the period from 27.03.2023 – 07.04.2023 for 13 CNC machine operators and manufacturing engineers from the high-end manufacturing companies Schaeffler, Fischer Asia, Intech Plus, GS&EC, APRO Engineering.

Ms Phan Thi Anh Tu and Mr Le Van Hung of LILAMA 2 – master trainers in smart manufacturing processes – provided the experts of the manufacturing enterprises with an in-depth knowledge and professional understanding of machine components and their functions. Further, the training participants were enabled to detect machine and programming failures on real life examples of their actual work and remedy those in consultation with the master trainers.

Mr Ho Dang Danh, maintenance supervisor from Fischer Asia commented: “The course content is rather direct to actual machines in our company. After the course, I have learned how to change driver and axis, how to switch axis, which will help us improve our work quality and gain deeper understandings about the SINUMERIK system.” 

All participants could complete their training successfully and received a certificate as proof of their newly gained competencies.

The practice-oriented training course was conducted in the frame of the Development Partnership with the Private Sector (DPP) “Vocational Training for Smart Manufacturing in Machine Tools”. The DPP is implemented jointly by the cooperation partners Siemens Limited Company Vietnam, LILAMA 2 International Technology College and the Programme “Reform of Technical and Vocational Education and Training (TVET) in Vietnam” and supported by the develoPPP.de programme of the German Federal Ministry for Economic Cooperation and Development (BMZ) implemented by Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH in cooperation with the Vietnamese Directorate of Vocational Education and Training (DVET).